Underbody Protection wax lightbrown

SprayTec underbody protection wax lightbrown is a top quality wax-based underbody coating material. Specially developed for drip-free application for immediate processing as a spray or as a ready-to-spray funnel bottle with the suction air or airless gun. Once dry, a permanent weather-resistant protective coat is created that provides reliable protection against rust, road salt, water, ice and snow. SprayTec underbody protection wax has excellent corrosion resistance (in acc. with DIN 53210SS, salt spray test 200 hours), excellent adhesion and wear resistance. The product is elastic, protects effectively against heat and cold, can be used between 5°C and 35°C. It cannot be painted over. Touch-proof after approx. 3-4 hours, dry hard after 24 hours. Application fields are underbodies and wheel houses form the fields cars, lorries, caravans and tanks, boats etc. Thanks to the wax-like layer, the vehicle is durably protected against  mechanical and chemical agents, such as e.g. stonechips, road salt etc.

Art.-No.: (500ml)
235 501 spray can

Art.-No.: (1000ml)
235 551 spray gun can



  • Top quality wax-based underbody protection, specially developed for drip-free and immediate processing as a spray
  • Durable, weather-resistant protective coat protects reliably against stone chipping, road salt, rust, water, ice, snow and corrosion damage etc.

Application fields:

  • For cars, lorries, vehicles, machines, caravans, tanks, boats etc. near the underbody and wheel houses

Product benefits:

  • Excellent corrosion resistance, in acc. with DIN 53210SS, salt spray test 200 hours
  • Excellent adhesion
  • Excellent wear resistance
  • Very high elasticity
  • Provides effective protection against heat and cold (can be used between 5 - 35°C)
  • Wax-like layer provides long-lasting protection against mechanical and chemical agents
  • Please do NOT paint over

Drying times:

  • Completely dried after 24 hours
  • Touch-proof after approx. 3-4 hours


  • Shake can well for 3 minutes before use
  • Test spray first
  • Spray several layers of the product on from a distance of 20-30 cm in cross-coats
  • Generously tape over any areas that should not be sprayed
  • Do not spray onto the engine, gears, brakes and exhaust pipe
  • Do not treat with spray oil
  • The treated surface needs to be thoroughly cleaned of penetrating oil, tar and residual wax
  • Remove any splashes on the car body immediately with a cloth soaked in petrol or white spirit
  • After use, turn the can upside down and spray until the valve is empty
  • Clean all used tools properly.