Cavity sealing for all car body cavities

SprayTec cavity sealing, brown, is a highly effective wax-based cavity preservation product with specific additives and solvents. For drip-free application, for immediate processing as a spray or as a ready-to-spray funnel bottle with the suction air or airless gun. The product forms an amber-coloured, transparent layer. Protects the cavities in the car body permanently against rust and can be used as protection for a variety of metal objects. SprayTec cavity sealing, brown, has excellent corrosion resistance (in acc. with DIN 53210SS, salt spray test 200 hours), excellent penetrability, in particular for hard-to-access parts. Protects permanently against rust, splashwater, road salt and other weathering effects. Stops penetration by water and represses any existing damp. SprayTec cavity sealing is effective against heat and cold and can be used between 5°C and 35°C. Touch-proof after approx. 3-4 hours, dry hard after 24 hours. Application fields are all car body cavities, such as sills, holms, doors, side parts, panelling etc.

Art.-No.: (500ml spray can)
235 504

Art.-No.: (1000ml spray gun can)
235 554

Properties

Application:

  • Top quality wax-based cavity sealing spray
  • Specially developed for drip-free and immediate processing as a spray
  • Ideally suited for all car body cavities, such as e.g. sills, holms, doors, side parts, hoods, panelling etc.
  • The product forms an amber-coloured, transparent layer

Application fields:

  • For cars, lorries, vehicles, caravans, tanks, boats etc., in particular for repairs

Product benefits:

  • Special protection against rust, splashwater, road salt and other weathering effects
  • Excellent corrosion resistance in acc. with DIN 53210SS, salt spray test 200 hours
  • Excellent adhesion
  • Effectively stops penetration by water and represses damp
  • Excellent penetrability (in particular hard-to-access places)
  • Provides effective protection against heat and cold (can be used between 5 - 35°C)
  • Also suitable as protection for metal objects
  • The spray nozzle and/or long spray pipe allows this product to be used even in hard-to-access places

Drying times:

  • Completely dried after 24 hours
  • Touch-proof after approx. 3-4 hours

Note:

  • Shake can well for 3 minutes before use
  • Test spray first
  • Spray several layers of the product on from a distance of 20-30 cm in cross-coats
  • Generously tape over any areas that should not be sprayed
  • Do not spray onto the engine, gears, brakes and exhaust pipe
  • Do not treat with spray oil
  • The treated surface needs to be thoroughly cleaned of penetrating oil, tar and residual wax
  • Remove any splashes on the car body immediately with a cloth soaked in petrol or white spirit
  • After use, turn the can upside down and spray until the valve is empty
  • Clean all used tools properly.