Bitumen Brush-on paint black

SprayTec underbody protection bitumen black is a top quality bitumen-based underbody coating material specially developed for applying with a paint brush. Protects the car reliably against rust, road salt, water, ice and snow. SprayTec underbody protection bitumen has excellent corrosion resistance (in acc. with DIN 53210SS, salt spray test 200 hours), excellent adhesion and excellent wear resistance. The product is elastic and has excellent anti-noise properties. Effective protection against heat and cold, can be used between 5°C and 35°C. Cannot be painted over. Touch-proof after approx. 5 hours, dry hard after 24 hours. Application fields are underbodies and wheel houses from the fields cars, lorries, caravans and tanks, boats etc. Thanks to a thick, elastic layer, the vehicle is permanently protected against mechanical and chemical agents.

Art.-No.: (1,3 kg brush-in-cap can)
235 600

Art.-No.: (2,5 kg brush-in-cap can)
235 601

Properties

Application:

  • Top quality underbody bitumen-based protection product
  • Specially developed for drip-free immediate processing with a brush
  • SprayTec underbody protection bitumen protects reliably against stone chipping, road salt, rust, water, ice, snow
  • Application fields:
  • For cars, lorries, vehicles, machines, caravans, tanks, boats etc. near the underbody and wheel houses

Product benefits:

  • Excellent corrosion resistance, in acc. with DIN 53210SS, salt spray test 200 hours
  • Excellent adhesion
  • Excellent wear resistance
  • Very high elasticity
  • Provides effective protection against heat and cold (can be used between 5 - 35°C)
  • Provides long-lasting protection against mechanical and chemical agents
  • Anti-noise set effectively
  • Please do NOT paint over!

Drying time:

  • Completely dried after 24 hours
  • Touch-proof after approx. 5 hours

Note:

  • Stir the paint in the can thoroughly before use
  • The product is applied with a brush
  • Carefully tape over all areas that are not to be treated
  • Do not use on engine, gears, brake parts and exhaust pipes
  • Do not treat with spray oil
  • The treated surface needs to be thoroughly cleaned of penetrating oil, tar and residual wax
  • Remove any splashes on the car body immediately with a cloth soaked in petrol or white spirit
  • After use, clean the can thoroughly with solvents and dispose of properly
  • Clean all used tools properly.